DS18B20 HEX code — time to pull it off October 13, 2011Posted by rik94566 in 1-wire, aquaponic automation, aquaponics, arduino, CEA, Controlled Environment Agriculture, DIY aquaponics, DS18B20, HEX code, indoor aquaponics, One-wire, sensor, Sensor Hub, Stainless Steel Temp Probe, Temperature Probe.
Tags: 1-wire, aquaponic automation, aquaponics, arduino, arduino sketch, automation, CEA, Controlled Environment Agriculture, DIY aquaponics, DS18B20, electronics, hacks, indoors aquaponics, microcontroller, rik kretzinger, sensor, Temp Probe, Temperature Probe
To accomplish this task 4 things are needed:
DS18B20 temp probe
sketch that will do the actual work for you.
WIRE USING A 3-WIRE CONFIGURATION:
I will be using the Sketch that I pulled down from hacktronics website — you can get there also.
Here is what the sketch will look when it is run:
THE LAST THING TO DO IS:
write the HEX code down somewhere so you do not forget it and make sure you know which probe the HEX code goes with.