jump to navigation

Slide Switch – wire configuration complete April 14, 2013

Posted by rik94566 in agponics.com, aquaponic automation, aquaponics, aquaponics electronics, DIY aquaponics, indoor aquaponics, IoT aquaponics, Slide Switch.
Tags: , , , ,
trackback

Here is how I did my slide switch so I could move from two different power sources.  It worked the way I thought it would, but until I actually connect things up I am never sure.  The basic concept is that all positive (RED) wires come off one side of the switch and the negative (BLACK) wires come off the other side.  It does not matter which is which, you just need to be consistent so you can duplicate the results on future projects.  Each one of the power sources  are at the ends of the slide switch.  Again it does not matter how you connect it up, but each source needs to be opposite of each other.  Configured this way the center prongs will be passed power depending on which end you have the slide positioned.

"SLIDE SWITCH LAYOUT"

“SLIDE SWITCH LAYOUT”

Advertisements

Comments»

No comments yet — be the first.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: