jump to navigation

Re-Design of agponic-MD January 29, 2014

Posted by rik94566 in agponic MD, agponicMD, agponics.com, aquaponic automation, aquaponics, aquaponics electronics, DS18B20, Float Sensor, Float Switch, indoor aquaponics, IoT aquaponics, One-wire.
Tags: , , , , , , , ,
trackback

agponicsMDAfter much thinking about how I could improve the desktop aquaponic automation simulator called agponic-MD (micro-device) I built a new one.  It helps to have people that wanted to purchase a few of them.  So I got busy and made it a bit  larger with expansion capability for future components like a 12V backup system  and additional sensors to learn how to automate.  Here is the feature set for the re-designed agponic-MD.

agponic MD
Fully valved for water movement and control
Large grow bed and  tank configuration
1 – water pump to drive unit

4 – water level control sensors
1 – RH and temp internal probe
3 – temp probes (grow bed / water tank / outside)
1 – water flow sensor
1 – pH probe and connectors
1 – DO or additional probe expansion options for future growth of unit
1 – controllable drain port
1 – grow bed media package to fit grow bed (comes from an established grow bed – so bacteria included)
1 – Container of starter water from an active system ( should you like to cycle the system)
1 – outside tank temp indicator
1 – Heater for tank water
1 – Air pump and stone

3 – Grow Pockets for holding plants
5 – Grow sponges for starting seeds and fit into grow pockets
3 – RJ-45 testing cable – for test jacks and sensor connectivity
Back-up air stone and supply option for expansion
Power cords to connect up valves and electrical items
Arduino or Raspberry Pi ready  — (can connect up to either one depending on situation)
Over flow configuration to prevent spillage in grow bed
RJ-45 control boxes that allows outside connection to micro-controller option using standard RJ-45 jacks
Switching External or micro-controller power configuration (depends on sensor power requirements)
EXPANSION CAPABILITY:
2 Additional RJ-45 jacks for sensor expansion
Connection port for DO Sensor to be added at future date (once developed)
e-Tape Sensor expansion
Capacity for adding fully functional 12V back-up system with TXT message notification via off-grid technology
======================================
With this new design it will allow me to have 3 different price points for the educational markets going forward.
Here is the difference in the lite version and the MD unit –  a pro version will also be available in the near future and I will post the feature set for it in a few days now that I have if finalized.
lite-MD visual
Advertisements

Comments»

1. Bob Francis - February 1, 2014

I would like to discuss Mr. Kretzinger’s technology in further detail. Please e-mail me with contact information. Thank you

rik94566 - February 2, 2014

@bob – thanks for reaching out to me regarding automated aquaponic technologies. I will contact you now. So if you do not see an email from me today contact me at rik@agponics.com as well. thx rik


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: